Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Rims / Spokes

GSport Ribcage Rim
$174.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
SRAM Rise 60 29-inch Replacement Spokes/Nipples/Washers
$30.00
CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel. - Length: 298mm - Spoke Interface: Straight Pull
SRAM Roam 30 27.5-inch Replacment Spokes/Nipples
$8.08
276mm Straight-Pull External for Roam 30 27.5 Wheels, 3-pack.
SRAM Roam 30 29-inch Replacement Spokes/Nipples
$8.08
294mm Straight-Pull External for Roam 30 29 Wheels, 3-pack
SRAM Roam 40/Rail 40 29-inch Replacement Spokes/Nipples
$13.00
294mm Straight-Pull External for Roam 40 and Rail 40 Wheels, 3-pack.
SRAM Roam 50 27.5-inch Replacement Spokes/Nipples
$16.00
281mm Bladed Straight-Pull External Black Roam 50 27.5 Wheels, 3-pack
SRAM Roam 50 29-inch Replacement Spokes/Nipples
$16.00
3-pack, 300mm Bladed Straight-Pull External Black Roam 50 29 Wheels
SRAM Roam 60 29-inch Replacement Spokes/Nipples/Washers
$26.00
3-pack, 298mm CX-Sprint Straight-Pull External Black Roam 60 29 Wheels
Bontrager Nebula Rim
$34.99
- Original equipment replacement rims for Bontrager Nebula wheels - Pinned Seam - Presta Valve
Race Face Arc Rims
$115.99 - $134.99
A wheelbuilder's favorite the world over, now available from Race Face. This welded, tubeless-ready workhorse is the go-to rim for XC to aggressive all-mountain with a range of rim widths to suit every riding style. - Aluminum 6061 rim and welded seam for excellent strength with minimum weight - Tubeless ready with strong tire retention bead - Weights for 27.5" 425g (24mm), 475g (27mm), 490g (30mm), 540g (35mm), 595g (40mm), 650g (45mm) - Weights for 29" 455g (24mm), 515g (27mm), 535g (30mm), 578g (35mm), 633g (40mm), 690g (45mm) - Tubeless kit sold separately - Decal kits sold separately
Race Face ARC 29-inch Carbon Rims
$499.99
Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 have been redesigned to take full advantage of the benefits carbon fiber has to offer. Featuring a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub and you’ve got a world-class wheelset ready for action.
Zipp Sapim CX-Sprint Straight Pull Spokes and Nipples
$11.35
Straight pull spokes and nipples from Zipp
WTB Scraper 27.5-inch
$129.95
Legendary tubeless technology has now been hand delivered to the plus-sized market. Why have a 2.8+ inch tire if you can’t experience a lovely tubeless ride? The Scraper rim features a TCS inner rim profile, 4D angled drilling, and WTB's light but stiff WT69 Alloy, all while still allowing for popular and available J-bend spokes. Yep, non-proprietary spokes but a high tech rim. The Scraper i40 is designed for 2.8" tires while the i45 is optimized for 3.0" tires. Experience TCS euphoria with WTB's Scraper rim and understand what this plus-sized grinning is all about. - Usage: Adventure/Plus Sized Tires/Bikepacking
Stan's NoTubes Grail Rim
$105.00
Your bike can do more. Whether you're riding and racing on gravel, pavement, or between the tape at a cyclocross race, Grail rims with Stan's patented BST-R tubeless technology offer less rolling resistance, more control, and the ability to seal most punctures almost instantly. Upgrade your bike to the leading tubeless rim design, and find out what you've been missing. The Grail's versatile BST-R rim design makes it compatible with tubeless road tires, low-pressure tubeless converted tires, and conventional tires and tubes, offering you total flexibility. The Grail's wider shape improves both cornering and straight line tire stability. Find out just what your bike can do with a set of Grail rims. - Designed for gravel, cyclocross, and road disc - BST-R rim design compatible with 25mm-40mm road tubeless tires, traditional road tires when used with tubes, and low-pressure cyclocross tires - Aero rim design is faster without being overly susceptible to crosswinds - WideRight rim design optimized for wider gravel and cyclocross tires
Race Face AR Offset 29-inch Rim
$64.99 - $69.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead
Stan's NoTubes Flow MK3 Rims
$100.00
The new Flow MK3 is wider, stronger, and lighter. Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width, offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing thanks to increased lateral stiffness and durability. The new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Built on the proven success of our Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail and All-mountain tires
Stan's NoTubes Hugo 52 Rims
$145.00
Hugo 52 for plus bikes are the first fat rims to feature Bead Socket Technology. Hugo’s ultra-low profile sidewalls combine with a special central raised box section to create a structurally superior fat rim that’s exceptionally light, fast-rolling, and nearly impervious to flats even when using tubes. The special shape of the Hugo series rims creates a superior seal, inflating easily without a tube. The interior rim shape also spreads out the overall contact area for better strength and support and excellent pinch flat protection. - For fat bike riding, racing and adventuring - First fat bike rim to feature genuine NoTubes' tubeless technology with innovative raised center rim profile for tubeless use - Rim width: 53.1mm external and 49.9mm internal for maximum tire volume and flotation - Compatible with “plus” and fat clincher tires when used with 27mm Yellow Tape, 35mm Valve Stem, and NoTubes Sealant
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$3.99 - $11.49
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
WTB Frequency Team 27.5-inch
$79.95
Frequency rims are renowned for their craftsmanship, durability, rigidity, and tubeless simplicity. An ETRTO-compliant inner rim profile provides standards-driven consistency while a tape and sealant system eliminates precious rotational weight. Legendary I-Beam construction and 4D Drilling further aid in lateral and torsional strength while maximizing lifespan. Usage: Cross Country, All Mountain, Gravity
WTB KOM Tough 27.5-inch
$85.95 - $99.95
Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. Proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world, KOM Tough rims are available in 25, 29, 35, 40 and 45mm widths to provide a burly rim for every usage and style of riding. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.
WTB KOM Light 29-inch
$94.95 - $99.95
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Available in widths ranging from i21 to i45, because all bikes should benefit from lightweight rims. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area
Race Face AR Offset 27.5-inch Rim
$64.99 - $69.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead
Race Face ARC Heavy Duty 27.5-inch Rim
$99.99
30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead
Race Face ARC Heavy Duty 29-inch Rim
$99.99
30mm Heavy Duty rim for gravity and e-bike applications. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready, strong tire retention bead
Race Face ARC Offset 27.5-inch Rim
$94.99 - $99.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
Race Face ARC Offset 29-inch Rim
$94.99
The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready
Stan's NoTubes Sentry MK3 27.5-inch Rim
$115.00
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction deliver width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheelset is a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. The Sentry MK3 proves wider can mean faster. - More stable 32mm internal width for tires up to 3.0" - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger - Patented BST design for easiest and most reliable tubeless - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
Stan's NoTubes Sentry MK3 29-inch Rim
$115.00
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction deliver width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 is a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails.The Sentry MK3 proves wider can mean faster. - More stable 32mm internal width for tires up to 3.0 - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger - Patented BST design for easiest and most reliable tubeless - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for 2.50"-3.00" trail tires
Stan's NoTubes Baron MK3 27.5-inch Rim
$115.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra low profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Patented bead socket tubeless technology means less rolling resistance and improved handling with high volume tires - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80"-3.20" Trail tires
Stan's NoTubes Baron MK3 29-inch Rim
$115.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra low profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Patented bead socket tubeless technology means less rolling resistance and improved handling with high volume tires - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80"-3.20" Trail tires