Saris' CycleGlide 2-Bike Add-On kit lets you hang two more bikes on your Saris CycleGlide overhead storage rack (sold separately).
The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.
• Folds small and is lightweight for easy mobility • Holds bikes by rear axle with soft rubber-dipped fingers • Fits variety bikes with 20" – 29" tires, and is compatible with most disc brakes.
Garage floor space is precious. Saris’ CycleGlide offers an ingenious and elegant space-saving solution. You can store up to four bikes of virtually any size and shape thanks to its adjustable hooks. The gliding rails maximize storage room and allow easy access when you want to take a bike down to ride.
Make the most of your space with Saris' Bike Bunk. It stores two bikes and adjusts to fit different bike styles and sizes. This free-standing mount features grippy, cushioned contact points that protect your floor and wall.
- Convenient storage for any bike with elegant space-saving design - Welded construction with padded wheel hook - Maximum load: 40lbs - Includes Da Vinci tire tray to save walls from tire marks
Tired of leaning your bikes against the wall? Feedback Sports' RAKK Display Stand is an elegant solution. Set it down where you want it and roll your bike's rear wheel into the stand. That’s it! The 3-point contact locks in the wheel holding the bike upright. Simple and sweet, the RAKK works on any size bike without adjustment. It folds easily for storage when not in use. And, you can clip several RAKKs together to hold all your bikes side-by-side. Plus, this durable stand is made of steel and coated with durable powder paint for a lifetime of service.
Gear Up's OakRak Floor-to-Ceiling Bike Storage Racks use their Smart Tension-mount design for installation between the floor and ceiling with ease (no permanent installation required). They're made of furniture-grade American red oak with a hand-rubbed oil stain and finish so they add class to any room and complement your bicycles. The solid-oak top plate uses compression foam at each corner to protect the ceiling, while the solid-oak base plate grips any surface for a tight fit between the floor and ceiling. The bikes are safely and securely held by their frames on vinyl coated-steel support arms that protect the paint and finish. There are Velcro straps included to secure the front wheel to the frame so that the wheel does not swing side to side during storage. The support arms also adjust independently up and down to hold any style of bike. This rack comes complete with everything to store/display two bikes.
- Oversize hooks for large MTB tires and tall aero rims - Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend - 50mm (2") of machine threading with a thread size of 10mm x 1.5mm - Black vinyl coated - Includes two nuts
Burley's water-resistant Trailer Storage Cover keeps your trailer clean and ready to go when not in use.
A compact and economical solution to store your bike and optimize space usage. The Swing-Up EX allows you to swing your bike to either side and is compatible with wheel / tire combinations having an overall height of 3.15" (8cm) and tire width up to 2.35" (approx 6.6cm). - Attachments: Wall mount - Material: Aluminum / steel / engineering grade plastic - Max Weight Capacity: 16 kg / 35 lb - Added Features: Rotatable Front Wheel Fixed Bar - Compatibility: Compatible with wheel /tire combinations having an overall height up to 8cm (3.15”) and tire width up to 2.35” - Size: 22.7 x 7.5 x 5.3 cm / 8.9” x 2.9” x 2.1” - Weight: 950 grams / 2.09 lb
The Leonardo FT (fat tire) storage hook is to designed to hold "fat tire" bicycles with tires up to 5 inches in width. Featuring elegant space-saving design, this rack offers convenient minimalist storage for any bike at a great price. Instead of throwing your cycling partner in the garage, display your bicycle like the work of art it is. Product Details: - Works with fat tires up to 5" wide - Tire tray saves wall from tire marks - Tough silver powdercoat finish - Rubberized coating protects wheel rim - Maximum load 50lbs (22Kgs)
Gear Up's Rack-n-Roll 1 Bike Stand is an elegant bike-parking solution that holds any bike upright and lets you easily move the bike around when it's parked, too. The specially shaped side bars provide stability while avoiding contact with derailleurs, disc brakes and axles. There are four small solid-plastic wheels on the bottom for rolling the rack around. And, because the stand offers adjustable settings from 1 to 5 inches wide, it will accept bikes with even the narrowest or widest tires. You can park bicycles by the front or rear wheel, which lets you line multiple bikes up more closely by putting every other one facing the opposite way (so the handlebars don't bump into each other).
Thule's free standing Bike Stacker stores bikes out of the way in your home, apartment, and garage. Constructed of strong steel, it will hold the heaviest bikes without fail, and its arms are independently adjustable for maximum convenience.
Feedback Sports' FATT RAKK Display Stand is an elegant solution for your fat bike. Set it down where you want it and roll your bike's rear wheel into the stand. That’s it! The 3-point contact locks in the wheel holding the bike upright. Simple and sweet, the RAKK works on any 3- to 5-inch wide tire without adjustment. It folds easily for storage when not in use. And, you can clip several RAKKs together to hold all your bikes side-by-side. Plus, this durable stand is made of steel and coated with durable powder paint for a lifetime of service.
- Easily holds a bike, kayak, or ladder - Efficient pulley system helps you lift and lower heavier objects - Auto-locking mechanism prevents accidental release - Engineered for durability with tough silver powder coat finish - Includes mounting hardware and full instructions - Maximum load: 50lbs
This wall mounted storage solution screws into the wall and offers adjustable hooked-arms to hold a bike. - Independently adjustable arms - Padded arms to protect bike - Dimensions: 16.25 x 17 x 14.5"
Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47” (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). • The ES-1 adjusts from 94 to 120cm (37"-47") • Horizontal width (inside to inside): 2.23 meters (87")
The MSW Universal Display Stand is adjustable and can be used with any style of bike, from road bikes to fat bikes. - Holds one bike - Fits tires 1 to 5-inches wide - Rubberized feet protect floors - Product dimensions: 21.5 x 13.5 x 14 inches
Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service. • 471 Wood thread including two nuts • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")
A shop grade floor stand that adjusts to any wheel size. - Extremely adjustable to securely hold any wheel size - Wide base with triangulated arms hold bikes firmly - Easy in-out for practical store use - Dimensions: 22 x 15 x 17" (560 x 380 x 430mm) - Tool-free adjustment with thumb screws - Rubberized feet protect floors
The Michelangelo gravity rack offers functional storage solutions in a contemporary art deco design. This unique product uses the force of gravity to harness superb support, reinforced by steel-tube construction. Rubber bumpers conveniently protect your walls and floor from scratches and scuff marks. This silver powder-coated bike storage rack will help you make the most efficient use of your valuable space. Looks great in any home or garage. Safely store your bikes with this new line of tough racks; sturdy large diameter tubing and extra padded support protect your favorite machines. - Leans against wall - No attachment required - Indpendent adjustable arms accomodate any bike style - Durable gray powder-coat finish - Easy to assemble - tools included - Maximum load 100 lbs (45 kgs) - Dimensions: 86 x 23.5 x 13.75 inches
Shop Rack connectors that can be used to connect up to 5 Shop Racks
- Convenient storage for any bike with elegant space-saving design - Welded construction with padded wheel hook - Maximum load: 40lbs
Freestanding two or four bike rack - Independent adjustable arms accommodate any bike style - Durable gray powder-coat finish - Easy to assemble - tools included - Max load 160 lbs (55kgs) - Dimensions: 24" x 24" x 86"
It’s a race day, a gran fondo, or maybe just a ride day – either way, there’s bikes everywhere and there’s a need for mass bike storage. And because you love bicycles, you want to protect them and you need a simple, non-permanent and effective bike parking solution. The A Frame is a versatile bike storage idea for hanging up to 8 bikes, and as the industry standard you’ll see the A Frame at practically every type of cycling event. Making contact with only the bottom of your seat, the A Frame is the best bike parking solution for expensive road, cyclocross, mountain bikes, electric bikes and even kids bikes. And when the day is done it folds up and stores easily in a compact tote. - Ideal bicycle storage space for bike races, gran fondos, triathlons, demo events and community cycling events - Versatile design allows for bike parking without risk of scratching bikes or damaging components - System fits most any road bike, cyclocross bike, mountain bike, fitness bike, electric bike, or kids bikes - Innovative design easily folds to a compact unit when not in use - Tool-free design makes setup and breakdown quick - Anodized 6000-series aluminum body is lightweight, corrosion resistant and incredibly durable - Provides an awesome bike parking solution for up to 200lbs (90kg) of bikes - Total width safely accommodates up to 8 bikes (not to exceed 200lbs / 90kg) - Wide support base and rubber coated feet provide stability on any surface - Included travel tote is water-resistant, durable and padded to protect your stand and your other equipment - At 17.6lbs (8kg) taking this versatile bike storage system along is never in doubt - Custom branded side panels available - 1-Year Warranty
The Feedback Sports RAKK XL is a versatile bike storage rack intended for Plus-size and Fat-bikes. Comes with an adapter for plus-size tires that can be removed as needed to expand the size of the tray. Store your bike by the front or back tire without touching any of your bikes components. Easy to use and low profile to store away. Simply roll your bike in and walk away. Fold flat for storage when not in use.
Because you love your bicycles, when you’re not riding them you want to protect them, but you also need to be space conscious. Introducing the Velo Hinge, an innovative and elegant bike storage idea that hangs your bike by the front wheel and allows it to safely swing sideways, to its smallest footprint. Fitting almost any bike and swinging left or right to match your needs, the Velo Hinge maximizes your space while showing love to your bicycles and your living space. And when not in use, it tucks away so you’ll hardly know its there.
• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs
Keep your garage organized or maximize your living space with Saris’ Bike Trac. A wide wheel track accepts most front and rear bike wheels, plus it's long enough to keep your bike securely in place and your walls protected. Mounting hardware is included.
Page 1 of 2 Next page