General Maintenance & Adjustments
This is a FREE class no reservation necessary. This class is a great way for you to know and understand the importance of checking your bike over before each ride. Our knowledgeable mechanics will give you hands on training in checking proper tire pressure; drive-train maintenance; chain cleaning; flat tire repair; suspension settings (air only); derailleur hanger checks and much, much more!
- Cost: FREE
- When: The first and second Saturdays of each month.
- Time: 8:00AM
- Where: Folsom Bike / Town Center Bike and Tri
Bicycle Maintenance Tips
Checking a few vital components of your bicycle periodically will increase the longevity of your investment and help keep you safe.
The chain needs to be replaced more frequently than most expect. Why? It can prolong the working life of the drive-train which if damaged can be expensive to replace. Suggested chain replacement:
- Road Bike - 1000-1500 miles
- Mountain Bike - 800-1000 miles (depending on riding conditions)
Chainrings & Cassette
The chainring and cassette are two drivetrain components the chain comes in direct contact. If the teeth on the components are hook-shaped, bent or broken they should be replaced. In addition, a worn chain usually warrants chainring and casette replacement.
Bottom Bracket & Bearings
The Bottom Bracket holds the crank system within the bike frame. If the crank system has become hard to turn, develops a creaking or clunking noise, it might be time to replace it, overhauled, or have the bearings replaced.
Cables & Housing
Cables & Housing help keep the bike braking and shifting smoothly. If there's any sign of corrosion, broken strands, fraying or kinking, it's time to replace it.
Tires & Tubes
Tires & Tubes are your vital connection with the road. Look for warning signs such as dry rotting, excessive cuts & tears, punctures, or if the tread is worn leaving a flat spot. Its recommended that tubes be replaced with new tires. If a tube has been patched, it should be replaced. A patched tube should only be used to get you home.
Brakes are an obvious important safety feature on any bicycle. Most brake pads have a wear indicator line or groove to help tell you when they need to be replaced. If the groove has disappeared or is nearly worn, it's time to replace them. In addition, if braking has become noisy or gritty check with a professional bicycle technician.
Disc Brakes: Check for pad wear, scoring or glazing of the rotor. Rotors should be replaced if they develop a wobble or have become bent.
Bar Tape & Grips
Handlebar tape and grips help keep the bike under control. Both should be replaced if torn, have become thin, appear to be dried-out, sticky or if gel has leaked out.
Also be sure to check out service page for valuable information on bicycle care and more maintenance tips!